£1,366.80
P/N: 31R7770010B5CC0001
Model Number: 31R7770010B5CC0001
Series: 4175 Intek OHV
Cylinder/s: Single
Cylinder type: Cast Iron Sleeved
Power: 17.5 HP /12.9 kW Gross
* (30.66 Nm @ 3600 rpm
**)
Capacity: 500 cm³/cc
Fuel type: Petrol
Cooling system type: Air
Crankshaft position: Vertical
Crankshaft type: Straight
Crankshaft diameter: 1” (25.4 mm)
Crankshaft length: 3.15” (80.19 mm)
Flywheel type: Heavy
Anti-vibration system: Yes
Top No Load rpm: 3300 +/- 100
Charging system: 9 Amp
Recoil starter: No
Electric starter: Yes
Fuel pump: Yes
Oil filter: Yes (Pressure Fed Lubrication)
Low oil cut off: No
Muffler: Yes
Fuel tank: No
Oil capacity: 1.4 ltr (Approx.)
** Approximately
** All torque levels are stated gross Nm per SAE J1940 as rated by Briggs & Stratton.
FREE Engine Oil to commission the engine is included.
Always read owners manual prior to commissioning engine. Damage caused by improper installation are not warrantable.
Shipping restrictions may apply. Please contact us for confirmation if the required delivery destination is outside of the UK.
IMPORTANT NOTE: If you are not completely sure that this engine will suit your intended application, please contact us with your original engine details first, (in the case of Briggs, the Model, Type and Code numbers). One of our Briggs trained staff will then be able to confirm whether this engine is suitable, and if not, assist with identification of the correct engine for your requirements.
